The EASA
ATPL Operational Procedures
test bank contains questions pertaining to
071-02-04 Noise Abatement
. The following list contains only a relatively small percentage of the pertinent
questions. Our software, which you are free to download now at no cost, will
generally contain a much more complete set of questions associated with this
test bank. This list is intended only to familiarize you in a general way with
the questions of the
Operational Procedures
test bank.
 |
GroundSchool:
Operational Procedures
EASA ATPL Theory Test Prep Software
for MS-Windows |
 | Sorry, file temporarily unavailable. Please check back soon. | |
|
|
|
|
That said, while the following questions are intended
as a general familiarization tool, this list may not be up-to-date nor accurate.
We do not update this website as often as we update our software, which will
contain at any moment all questions that we have for a given test / topic. Therefore,
if you need to actually study for your test, instead of using the list below,
we strongly, strongly encourage you to download our GroundSchool
EASA ATPL
Written Test Prep Software and Apps. Not only is it more complete and up-to-date, but is also considerably faster and more efficient as a study tool.
| Sample Questions
from the EASA ATPL
Operational Procedures
Test Bank |
- According to ICAO Document 8168 Part V, when using Procedure A for noise abatement, when must you reduce power:
- Noise abatement procedures are established in accordance with:
- According with the noise abatement take-off and climb procedure B, as established in DOC 8168 - Ops Volume 1, part V, aircraft must climb at V2 + 10 to 20 kt, until reaching:
- When setting up a minimum noise climb, the minimum height at which a power reduction shall be allowed is:
- During an approach procedure which involves noise abatement, the aeroplane is to be in the final landing configuration at any point after passing the ... or at a point ... from the threshold of the landing runway, whichever is earlier.
- According to ICAO Document 8168 Part V, when using Procedure B for noise abatement, when must you reduce power?
The
list above contains 1/4 or less of the actual number of questions
and may not be up to date! Download the software today to get
access to all available questions. |
For
more information about the EASA ATPL
Operational Procedures
test bank, click here.
Copyright,
Content, and Accuracy Notice: . Dauntless Software grants visitors
permission to use the contents of this page for personal use - commercial or
public use, including collecting (or harvesting) of any data or material on
this page is strictly prohibited. This material is presented for informational
purposes only and may be in error. Dauntless Software works hard to maintain
our EASA ATPL question banks. If you see an error on this web page, it
is likely NOT an error that is repeated in our software, as our software (unlike
this web page) is connected to our editorial mechanism whose mission is to quickly
identify and correct errors. If you see what you believe to be an error, please
download and try our software to see if the error is repeated there. If you
believe it is, you can use the issue-reporting mechanisms within the software
to contact our editors about any concern you may have and we will be happy to
look into it promptly.
<
|
