BODY {font-family:"Arial"; font-size:18;margin:0px;padding:0px;text-align:center;min-width:780px;}
#centerwrapper {text-align:left;width:780px;margin-left:auto;margin-right:auto;}
1/48 scale pre-finished. Die-cast metal with a minimum of plastic. Professionally painted. All markings pad applied for superb results. Canopy slides open. Comes with a pilot that can be removed. Comes with display stand. Landing gear is fully retractable and can be displayed up or down. Propeller is metal. Extremely sought after by collectors.
Hobby Master 1/48 Air Power Series HA8611 Hurricane Mk.I, P3143, Sgt. B. Fürst, 310. (Czech) Sqn., Duxford, Sept. 1940
|
The Hawker Hurricane was the first British single-engine fighter and the first single wing aircraft with retractable landing gear as well as an enclosed cockpit and 8 machine guns. The Hurricane went into operational service in December 1937 with the RAF 111 Squadron. The Hurricane is usually over looked as a major player in the BoB because of the Spitfire but 80% of the 1,792 German aircraft shot down were because of the Hurricane. There were 14,533 Hurricanes produced in all variants.
Hurricane Mk.I P3143 NN-D was the most successful fighter belonging to the famous No. 310 Czechoslovakia Squadron during the Battle of Britain. This aircraft was used by Sergeant Bohumil Furst to score three of his five victories. Furst fled to France and joined their air force were he scored two victories. When France fell Furst escaped to England and joined the 310 Squadron. NN-D served from July 24, 1940 until October 16, 1940 when it was destroyed and the pilot Sergeant J. Calupa was lost.
Specifications for the Hawker Hurricane Mk. I Manufacturer – Hawker Industries Country – UK First Year of Service – 1937 Production _ 14,583 Crew – 1
Dimensions Length – 31.4 ft (9.57 m) Wingspan – 39.99 ft (12.19 m) Height – 13.12 ft (4.0 m)
Weight Empty – 4,982 lb (2,260 kg) Maximum Take-Off – 6,446 lb (2,924 kg)
Performance Powerplant 1 x Rolls-Royce Merlin III 12-cylinder Liquid-cooled Producing 1,030 hp 2 Bladed Propeller Later Production Powerplant – 3,164 x Merlin III producing 1,029 hp with a Three-Blade Propeller Maximum Speed – 318 mph (511 kmh / 276 kts) Maximum Range – 460 miles (740 km) Service Ceiling – 35,991 ft (10,970 m) Rate of Climb – 2,520 ft/min (768 m/min)
Armament Early Production Hardpoints – 2 Machine Guns – 8 x 7.7 mm Colt-Browning in Wings Later production Machine Guns – 8 or 12 x 7.7 mm Colt-Browning in Wings Hispano Canons – 4 x 20 mm in the Wings Optional Bombs Under-Wings 2 x 250 lb or 500 lb 8 x Unguided Rockets Under-Wings 2 x 40 mm Canons Under-Wings
|
|
This new site is being updated regularly and it will be much improved before too long. Please be patient, give it time, and check back regularly.
Opportunities for community collaboration are in the works for a little further down the road.
|
|
- This is not a retail site. You cannot buy models here.
- Thanks to Dauntless Aviation for providing web hosting and other support for this site. Real or sim pilot? Check out their stuff!
- This is not an official site of any manufacturer or retailer. Information provided here may be incomplete or in error. Use at your own risk.
- This is not an "advice" site. Please do not contact us asking about these models. Please contact a manufacturer or retailer with your questions or comments.
- Please update your links!
- Update HomePage links from the HMC website to either www.MetalWings.com or, preferably, www.dauntless-soft.com/MetalWings.
- Update your page links to this page from HMCwebsite/HA8611.html to http://www.dauntless-soft.com/MetalWings/HA8611.asp
- This site will be modified over time. We are well aware of its many issues, including missing images and bad formatting.
|
|
© 2024 Dauntless Aviation • 4950C York Road 110, Buckingham, PA, 18912, USA •
Contact Us •
Privacy Policy / Terms / Conditions
|
|