Diecast Aircraft Information

MetalWings Diecast Aircraft Reference by Dauntless Aviation

The Spitfire Mk.1 first became operational in July 1938 at Duxford, Cambridge. At the beginning
of WWII 9 RAF squadrons were equipped with the Mk.1’s with two others converting to the new
aircraft. By June 1940 the Mk.1 was being replaced by the faster long-range Mk.II but not before
the Mk.I had bore the brunt of the Battle of Britain. The Mk.I also flew protective cover over the
evacuation of Dunkirk. The Mk.1A had 8 machine guns instead of 4, a bulged canopy, a 3-blade
propeller, self-sealing fuel tanks, armored windscreen and armor plating in front of and behind

Arthur Giles Blake attended the Royal Naval College and received his FAA wings in January
1940. On June 15, 1940 he was one of the FAA pilots assigned to the RAF at 7 OTU. On July 1,
1940 he was assigned to No. 19 Squadron and because of his naval background was
nicknamed “Admiral”. During September 1940 Sub Lieutenant Blake downed an He-111, shared
another, destroyed 3 Me-109s, damaged an Me-110 and a Do-17 before being shot down
himself and killed on October 29, 1940.

Specifications for Supermarine Spitfire Mk.1A (late production)

Role – Interceptor Fighter

Mk.1A Produced – 1,536

Crew – one

Performance
Engine – 1 x Rolls-Royce Merlin III, liquid-cooled, V12
HP @ Altitudes –
1,030 hp @ 16,250 ft (4,953 m)
880 HP @ take-off
Speed
Maximum @ 20,000 ft (6,100 m) – 353 mph (568 kph)
Cruising – 210 mph (338 kph)
RoC (Rate of Climb)
Initial – 2,530 ft/min (771 m/min)
Time to 20,000 ft (6,096 m) – 9 minutes 25 seconds
Service Ceiling – 31,900 ft (9,723 m)
Normal Range – 395 miles (637 km)
Endurance – 1.78 hrs

Weights
Empty – 5,040 lb (2,286 kg)
Full – 6,150 lb (2,789 kg)

Dimensions
Length – 29 ft 11 ins. (9.12 m)
Height to tip of propeller – 11 ft 5 ins (3.48 m)
Wingspan – 36 ft 10 ins. (11.23 m)

Armament
8 x 0.303 in (7.7 mm) Browning machine guns, 300 rounds/gun

1/48 scale pre-finished.
Die-cast metal with a minimum of plastic.
Professionally painted.
All markings pad applied for superb results.
Canopy slides open.
Comes with a pilot that can be removed.
Comes with display stand.
Landing gear is fully retractable and can be displayed up or down.
Propeller is metal.
Extremely sought after by collectors.

Hobby Master 1/48 Air Power Series
HA7812
Spitfire Mk.IIa
P7423/QV-Y, S/Lt. Blake
No. 19 Sqn., October 1940

MODEL MAY COME WITH A
RUDDER BALANCE THAT
YOU PLACE ON THE TAIL
WHEN YOU RECEIVE THE
MODEL.

This new site is being updated regularly and it will be much improved before too long. Please be patient, give it time, and check back regularly. Opportunities for community collaboration are in the works for a little further down the road.

This is not a retail site. You cannot buy models here.

Thanks to Dauntless Aviation for providing web hosting and other support for this site. Real or sim pilot? Check out their stuff!

This is not an official site of any manufacturer or retailer. Information provided here may be incomplete or in error. Use at your own risk.

This is not an "advice" site. Please do not contact us asking about these models. Please contact a manufacturer or retailer with your questions or comments.

Please update your links!

Update HomePage links from the HMC website to either www.MetalWings.com or, preferably, www.dauntless-soft.com/MetalWings.
Update your page links to this page from HMCwebsite/HA7812.html to http://www.dauntless-soft.com/MetalWings/HA7812.asp

This site will be modified over time. We are well aware of its many issues, including missing images and bad formatting.