BODY {font-family:"Arial"; font-size:18;margin:0px;padding:0px;text-align:center;min-width:778px;}
#centerwrapper {text-align:left;width:778px;margin-left:auto;margin-right:auto;}
Hobby Master 1/48 Air Power Series HA7003 USN Brewster F2-A2 Buffalo VS-201 USS Long Island (AVG-1) 1941
|
HA7003 F2 A2 Brewster, a company with absolutely no prior experience building fighters, produced the F2A-2. Management promised more than the plane could deliver and it was over sold worldwide and production fell extremely far behind. Finally the U.S. Government stepped in and took control of the company and production. The first mono-winged fighter for the Navy the F2A-2 was underpowered and plagued by landing gear problems that never did meet the specifications agree to by Brewster. It seemed this little plane always came up short in the performance department.
VS-201 and USS Long Island USS Long Island was a converted cargo ship commissioned June 1941. She was the first USN ship to be designated an Auxiliary Carrier and was considerably slower and smaller than the fleet ships. The USS Long Island and her F2A-2’s were both less capable of doing the job of the bigger and faster equipment. The 8 Brewsters of Scouting Squadron VS-201 were testing the feasibility of this class of carrier. Soon after Pearl Harbor VS-201 was land-based with the ship being converted back to cargo at war’ s end.
Brewster F2A-2 Specifications:
Power plant: One Wright R-1820-40 Cyclone nine-cylinder single row air-cooled radial, rated at 1200 hp
Performance: Maximum speed - 285 mph at sea level 323 mph at 16,500 ft. 344 mph at 26,500 ft. Cruising speed 157mph Landing speed 73 mph Initial climb rate 2500 ft/min.
Service ceiling: 34,000 ft.
Maximum range: 1670 miles
Weight: Empty: 4576 lbs. Gross: 5942 lbs. Maximum take-off: 6890 lbs.
Dimensions: Wingspan – 35 ft. Length – 26 ft. Height – 11 ft. 8 ins. Wing area – 209 sq. ft
Armament: Four Browning 0.50 in. Machine guns, two in the upper engine cowling, one in each wing. Bomb racks for 100-lb bombs could be mounted under each wing just outboard of the main landing gear.
|
Accurate 1/48 scale
Professionally painted
Pad applied markings
Opening canopy
Option to use or not use bombs
Movable rudder
Retractable landing gear with rolling rubber wheels
Display stand provided
Maximum amount of metal with minimum plastic used
Expertly Pre-assembled
An excellent to your collection
THESE ARE PRE-PRODUCTION PICTURES NOT THE RETAIL VERSION
|
|
This new site is being updated regularly and it will be much improved before too long. Please be patient, give it time, and check back regularly.
Opportunities for community collaboration are in the works for a little further down the road.
|
|
- This is not a retail site. You cannot buy models here.
- Thanks to Dauntless Aviation for providing web hosting and other support for this site. Real or sim pilot? Check out their stuff!
- This is not an official site of any manufacturer or retailer. Information provided here may be incomplete or in error. Use at your own risk.
- This is not an "advice" site. Please do not contact us asking about these models. Please contact a manufacturer or retailer with your questions or comments.
- Please update your links!
- Update HomePage links from the HMC website to either www.MetalWings.com or, preferably, www.dauntless-soft.com/MetalWings.
- Update your page links to this page from HMCwebsite/HA7003.html to http://www.dauntless-soft.com/MetalWings/HA7003.asp
- This site will be modified over time. We are well aware of its many issues, including missing images and bad formatting.
|
|
© 2024 Dauntless Aviation • 4950C York Road 110, Buckingham, PA, 18912, USA •
Contact Us •
Privacy Policy / Terms / Conditions
|
|