BODY {font-family:"Arial"; font-size:18;margin:0px;padding:0px;text-align:center;min-width:780px;}
#centerwrapper {text-align:left;width:780px;margin-left:auto;margin-right:auto;}
Hobby Master 1/72 Air Power Series HA5405 Northrop T-38 Talon NASA 901, Ellington Field, Texas, 1960s
|
1/72 scale pre-finished. Die-cast metal with a minimum of plastic.
Professionally painted.
All markings are pad applied for superb results.
Crew figure.
Comes with display stand.
Landing gear can be displayed up or down.
Extremely sought after by collectors.
The first prototype of what would become the Northrop T-38 Talon and F-5 Freedom Fighters flew on April 10, 1959. The first Talon entered service on March 17, 1961 at Randolph AFB. The USAF and NASA used the Talon to help their pilots maintain their proficiency. NASA especially liked the T-38 for its much lower operating and maintenance costs compared to the F-18 they had tried. Because of the low cost to operate the T-38 the USAF Thunderbirds Demonstration Team used them from 1974 – 1983 during the OPEC oil embargo.
Northrop T-38 Talon NASA 901 MSN 5528 AF serial 63-8181 was used by astronauts for travel and as chase aircraft. On February 28, 1966 NASA 901 piloted by Commander E. See Jr. and rear seat Captain C. Bassett Jr. along with another T-38 NASA 907 departed Ellington, Texas for St. Louis, Missouri. The destination was low broken clouds, rain, snow and fog. NASA 901 pilot realized he was too high to land so he did a visual go-around but struck the McDonnell Aircraft building killing both on board.
Specifications Northrop T-38A Talon Years of Production – 1961 / 1972 Number produced – 1,100 + Crew – 2 x Instructor / Student
Dimensions Length – 46 ft 4.5 in (14.14 m) Wingspan – 25 ft 3 in (7.7 m) Height – 12 ft 10.5 in (3.92 m)
Weight Empty – 7,200 lb (3,270 kg) Loaded – 11,820 lb (5,360 kg Maximum Take-Off – 12,093 lb (5,485 kg)
Performance Engines – 2 x General Electric J85-5A (J855R after PMP modification) Afterburning Turbojets Thrust Dry – 2,050 lbf (9.1 kN) per engine Afterburner – 2,900 lbf (17.1 kN) per engine Maximum Speed – Mach 1.3 (858 mph / 1,381 km/h) Range – 1,140 mi (1,835 km) Service Ceiling – 50,000 ft (15,240 m) ROC – 33,600 ft/min (170.7 m/s)
|
|
This new site is being updated regularly and it will be much improved before too long. Please be patient, give it time, and check back regularly.
Opportunities for community collaboration are in the works for a little further down the road.
|
|
- This is not a retail site. You cannot buy models here.
- Thanks to Dauntless Aviation for providing web hosting and other support for this site. Real or sim pilot? Check out their stuff!
- This is not an official site of any manufacturer or retailer. Information provided here may be incomplete or in error. Use at your own risk.
- This is not an "advice" site. Please do not contact us asking about these models. Please contact a manufacturer or retailer with your questions or comments.
- Please update your links!
- Update HomePage links from the HMC website to either www.MetalWings.com or, preferably, www.dauntless-soft.com/MetalWings.
- Update your page links to this page from HMCwebsite/HA5405.html to http://www.dauntless-soft.com/MetalWings/HA5405.asp
- This site will be modified over time. We are well aware of its many issues, including missing images and bad formatting.
|
|
© 2024 Dauntless Aviation • 4950C York Road 110, Buckingham, PA, 18912, USA •
Contact Us •
Privacy Policy / Terms / Conditions
|
|